COTE-04 Pneumatic Extended Cut-Off Tool

Cut-Off tools are must-have items for most metal fabricators and automotive restoration shops. There are typically three different types available: In-Line Cut-Off Tool which is more or less the same idea as using a grinder to cut stone; a Standard Cut-Off Tool that is similar to a straight grinder with a safety guard for the general cutting applications; an Extended Cut-Off Tool that is designed to use for difficult to reach areas. Alpha® introduces the COTE-04 Extended Cut-Off Tool. This cut-off tool is 14-3/4” in length and has a newly designed gear head with the spindle lock that has a very low profile to reach the tight and hard-to-reach areas. The COTE-04 comes with a Push-to-Adjust swivel safety guard that changes into 11 positions (126 degree adjustable). The operation is also comfortable with a Built-in Cushion Grip and a rear exhaust design. This tool boasts the industry’s strongest motor: a 1.0 HP that enhances the capacity of the Ultracut ABM series blade.

Question : What kind of compressor do I need to use Alpha® COTE-04?

Answer : Since COTE-04 may consume up to 4 CFM, Alpha recommends using with 3 hp or larger compressor that is commonly found in garages.

Question : Can I use COTE-04 for Flush Cutting?

Answer : No, you cannot use the COTE-04 for flush cutting due to the flange and lock nut design.

Question : Does the COTE-04 come with an Ultracut ABM Series blade?

Answer : No. The COTE-04 comes with a standard aluminum oxide abrasive cut-off wheel for metal.

Question : What kind of maintenance do I have to do on the COTE-04?

Answer : Yes as long as you have the required compressed air available, you can use the COTE-04 at the jobsite.

Question : Is there a dust shroud available for the COTE-04?

Answer : No. There is not a dust shroud available for the COTE-04 at this time.